eCigTalk.ru - Powered by vBulletin


TopOfVape.ru: ЖИЖИ для НАРОДА от 120 руб./100мл, LG HE4 270р., Suorin AIR 1050р. СДЭК от 1000р. без предоплаты, СПб беспл. ПВЗ.
Дистрибьютор jija: Оптовые цены производителей! Zombie Party 120мл - от 235р, Cotton Candy 120мл - от 165р, BOSHKI 100мл - от 235р +100 брендов.
iCigarette.ru: Самый большой он-лайн магазин жидкости для электронных сигарет в России. Больше 100тыс. вариантов! 30мл и 6х6мл за 1 руб! Код 10% скидки ecigtalk

Показано с 1 по 4 из 4

Тема: 3FVAPE SXK BB series Update

  1. #1
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,288
    Записей в дневнике
    8

    3FVAPE SXK BB series Update

    SXK BB Mod Kit >>

    SXK BB 70W All-in-One Box Mod Kit Clone with USB Port
    The SXK BB Box Mod Kit Clone is constructed from aluminum with an all-in-one design. This mod comes with Kanger Subtank RBA Coil, Kanger OCC coil adaptor, Nautilus coil adaptor.

    SXK BB 60W All-in-One Box Mod Kit Clone with USB Port
    The SXK BB Style mod is constructed from aluminum with an all-in-one design. It is powered by 1 x 18650 battery (not included) and maximum power output is 60W. The box mod is powered by Evolv DNA 60 chip.


    SXK BB RBA >>

    SXK Mission XV KRMA GEN Bridge RBA Clone with 5 Airflow Reducers
    The SXK Mission XV KRMA GEN Bridge Clone is compatible with SXK BB / Billet Box Mod / SXK Bantam Box 30W Mod Kit / SXK Bantam Revision 30W Box Mod Vape Kit, which is made of 316 Stainless Steel. It comes with 5 Airflow Reducers (Inner Hole Diameter: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm) and a PEEK insulators. The Bridge features a fully adjustable airflow system to suit open airflow to mouth to lung (MTL) vaping users.

    SXK Haku Xeta Inside RBA Clone
    The SXK Haku Xeta X eta RBA Clone is constructed from 316 stainless steel and ultem. This RBA consists 510 chimney section (SS), airdraw insert, elevating coil clamp system, airflow disk, wick channel controller pin, and air intake. It is suitable for BB Box Mod Kit.

    YFTK Haku Xeta Inside RBA Clone
    The YFTK Haku Xeta RBA Clone is constructed from 316 stainless steel and ultem. This RBA consists 510 chimney section (SS), airdraw insert, elevating coil clamp system, airflow disk, wick channel controller pin, and air intake. It is suitable for BB Box Mod Kit.

    SXK Insider V2 MTL RBA Clone
    The SXK Insider V2 RBA Clone is constructed from 316 stainless steel and in 14mm diameter. This RBA features dual-post design, huge juice channels and bottom airflow design. It is designed for SXK BB Box Mod Kit and SXK Bantam Box 30W. This RDA supports MTL vaping, comes with 3 airflow modules: 1 hole x 1.0mm, 2 holes x 1.2mm, 3 holes x 1.2mm, and extra chimney with 2.0mm diameter hole.

    SXK Insider RBA Clone
    The SXK Insider RBA Clone is constructed from stainless steel and in 14mm diameter. This RBA features dual-post design, huge juice channels and bottom airflow design. It is designed for SXK BB Box Mod Kit.

    SXK MTL RBA
    The SXK MTL RBA is made from 316 stainless steel. It is suitable for SXK BB Box Clone 40W / 60W / 70W Mod kit / Bantam Box 30W mod kit. It supports single coil builds.

    SXK BB Box RDA Clone
    The SXK BB Box RDA Clone is constructed from stainless steel with removable stainless steel drip tip. It holds large airflow holes and dual posts build deck, featuring 14mm diameter.


    SXK BB DIY Kit >>

    SXK MTL RBA Replacement Modular AFC + Screws + Airflow Insert Parts
    The replacement parts include modular AFC, screws ,and airflow insert parts, which are made of PC and ABS material. Sizes of these insert parts (White: 0.8 x 0.8mm, Red: 0.8mm, Blue: 1mm, Yellow: 1.2mm, Orange: 1.5mm). These replacement parts are suitable for SXK MTL RBA.

    SXK Replacement Front + Back Cover Panel
    The SXK Replacement Cover Panel is made of PC material, and is designed for SXK BB 70W / DNA60W Box Mod Clone. This cover panel comes with 2 pieces (front and back).

    SXK Button + Screen Plate + Button Plate Set(3 PCS)
    This SXK replacement accessories set are suitable for SXK BB 70W / DNA60 60W box mod kit. This set includes fire button + screen plate + button plate.

    SXK 510 Connector + Button + Screen Plate + Button Plate Set(4 PCS)
    This SXK replacement accessories set is suitable for SXK BB 70W / DNA60 60W box mod kit. This set is including 510 Connector + fire button + screen plate + button plate.

    SXK Replacement 1.5ohm Ceramic Coil + Adapter + 0.8mm / 1.2mm Airflow Valve
    The SXK Replacement accessories set is suitable for Bantam Box BB Mini Box Mod kit. The set includes 1.5ohm Ceramic Coil + Adapter + 0.8mm / 1.2mm Airflow Valve. The 0.8mm Airflow Valve is Suitable for MTL Vaping and the 1.2mm Airflow Valve is Suitable for Nicotine salt Vaping.


    SXK BB Vaping Accessory >>

    SXK Replacement O-Ring Seals(3 PCS)
    The SXK Replacement O-Ring Seals is suitable for SXK BB 60W / 70W Box Mod Kit. The O-Ring Seal are made of Silicone, which include one big O-Ring Seal and two small O-Ring Seals. 3 PCS / Pack.

    SXK Replacement Tank
    The SXK BB Box Mod Replacement Tank Clone is constructed from PEI. It is designed for SXK BB Box Mod Kit / Bantam Box BB Mini Box Mod.

    SXK Vape Shell
    The SXK Vape Shell is made of 316 Stainless Steel and is suitable for SXK BB Box Mod Clone.

    SXK Replacement Tank Cover Plate + O-rings
    The replacement glass plate and silicone o-rings are suitable for SXK BB Box Mod Kit. The glass plate works as a tank door or cover. There comes with two pieces of o-ring, one for the top hole, the other for the bottom hole of the tank.

    SXK Replacement Cover Panel
    The replacement cover panel is made from PEI, and is designed for SXK BB Box Mod Clone. This cover panel comes with 2 pieces (front and back). Please Note: This replacement cover is not suitable for the purple version. It is suitable for all the SXK BB Box in 3FVape.
    Последний раз редактировалось Tina3FVAPE; 25.03.2020 в 11:49.

  2. #2
    Можно мне всего и по две штуки, бб можно 1))

    Отправлено с моего COL-L29 через Tapatalk
    Коротко о себе  

    Немного рекламы  

  3. #3
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,288
    Записей в дневнике
    8
    SXK BB RBA >>

    SXK Bridg'D MTL/DL RBA Clone with 2.5mm Airflow Insert
    The SXK Bridg'D RBA Clone is constructed from 316 Stainless Steel, which is suitable for SXK BB / Billet Box Vape Mod Kit as a replacement RBA part. The RBA is easy to build and wick. It supports MTL / DL vaping experience, zero dry hits, dialing airflow is very easy, and fitments are flawless. The RBA comes with a 2.5mm airflow insert, a full RBA Deck, 2 Cap / Chimneys, a bridg'd key, a 510 adapter tool, panda button, integral tip, and spare bag (o-rings and screws).

    YFTK Haku Xeta Inside RBA Clone with PEI Black Middle Top Cap
    The YFTK Haku Xeta RBA Clone is constructed from 316 stainless steel and ultem. This RBA consists 510 chimney section (SS), airdraw insert, elevating coil clamp system, airflow disk, wick channel controller pin, and air intake. It is suitable for BB Box Mod Kit. The RBA comes with a PEI Middle Top Cap.



    SXK BB DIY Kit >>

    SXK Fire Button + Button Plate Set
    This SXK replacement accessories set are suitable for SXK BB Bantam BB Mini box mod kit. This set includes Fire Button + Button Plate. Made from Stainless steel with silver plating

    KS Replacement Stainless Steel Base Deck + 3 Mouthpiece Drip Tip Set
    The KS Replacement Drip Tip Set consists of one Stainless Steel Base Deck and three mouthpiece drip tips. They are suitable for SXK Billet BB Box Mod kit as replacement parts.

    SXK Fire Button + Screen Plate + Button Plate Set(3 PCS)
    This SXK replacement accessories set are suitable for SXK BB Bantam BB 60W / 70W box mod kit. This set includes Fire SXK Button + Screen Plate + Button Plate Set..The Panel Set adopts sandblasting technology.

    Across Intan Grip Base Clone + MTL / DL Drip Tip Kit
    The Instan Grip Drip tip Kit Clone includes 1 instan hand screw grip drip tip base, 1 drip tip for MTL (hole 3mm), 1 drip tip for DL (hole 5mm). The grip drip tip base is made of stainless steel and drip tip is made of POM. It is suitable for SXK BB / Billet Box Vape Mod Kit.

    Across Intan Grip Base Clone + MTL / DL Drip Tip Kit
    The Instan Grip Drip tip Kit Clone includes 1 instan hand screw grip drip tip base, 1 drip tip for MTL (hole 3mm), 1 drip tip for DL (hole 5mm). The grip drip tip base is made of stainless steel and drip tip is made of PC. It is suitable for SXK BB / Billet Box Vape Mod Kit.


    SXK BB Vaping Accessory >>

    SXK Replacement Tank
    The SXK BB Box Mod Replacement Tank Clone is constructed from POM and glass. It is designed for SXK BB Box Mod Kit / Bantam Box BB Mini Box Mod.

    SXK Replacement Front + Back Cover Panel
    The Replacement Cover Panel is made from resin, and is designed for SXK BB 70W / DNA60W Box Mod Clone. This cover panel comes with 2 pieces (front and back).

    Kindbright Replacement AFC Airflow Insert
    The Kindbright Replacement AFC Airflow Inserts come with 0.8mm / 1.0mm / 1.2mm / 1.4mm airhole and are suitable for Billet Box DNA 60W / SXK BB 60W Mod Clone/ YFTK BB 60W Mod Clone.

  4. #4
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,288
    Записей в дневнике
    8
    New Color!!

    SXK BB Mod Kit >>

    SXK BB(Billet Box) 60W All-in-One Box Mod Kit Clone with USB Port

    The SXK BB(Billet Box) mod Clone is constructed from aluminum with an all-in-one design. It is powered by 1 x 18650 battery (not included) and maximum power output is 60W. The box mod is powered by Evolv DNA 60 chip. Without Logo.

    This BB Box comes with USB port for firmware upgrading, setting modification and user customization via software.
    There will be a little color difference the image and the actual product. The final refers to the manufacturer's actual product.


    -------------------
    3FVape 2020 Easter Sale Information
    Time: 00:00:00 April 10th 2020 - 23:59:59 April 12th 2020 (MDT)
    Offer: Site-wide 5% OFF + Extra Gift
    Coupon code: Easter2020

    Tips For Self-Protection From Covid-19 >>>

    Hygiene products for anti COVID-19 >>>

Похожие темы

  1. All of SXK-series 5% Off - SXK-series on 3FVape - Code:3FVape-SXK
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 0
    Последнее сообщение: 02.08.2019, 07:15
  2. New color available,the SXK BB 60W All-in-One Mod Kit Clone
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 12
    Последнее сообщение: 07.06.2018, 10:40
  3. Only $75.00,SXK BB 70W All-in-One Box Mod Kit Clone
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 3
    Последнее сообщение: 09.08.2017, 12:28
  4. Only $74.99,SXK BB 70W All-in-One Box Mod Kit Clone
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 2
    Последнее сообщение: 14.07.2017, 12:21

Метки этой темы

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  

Условия предоставления информации | Отказ от ответственности

© eCigTalk.ru 2010-2019