eCigTalk.ru - Powered by vBulletin


TopOfVape.ru: ЖИЖИ для НАРОДА от 120 руб./100мл, LG HE4 270р., Suorin AIR 1050р. СДЭК от 1000р. без предоплаты, СПб беспл. ПВЗ.
Дистрибьютор jija: Оптовые цены производителей! Zombie Party 120мл - от 235р, Cotton Candy 120мл - от 165р, BOSHKI 100мл - от 235р +100 брендов.
iCigarette.ru: Самый большой он-лайн магазин жидкости для электронных сигарет в России. Больше 100тыс. вариантов! 30мл и 6х6мл за 1 руб! Код 10% скидки ecigtalk

Показано с 1 по 16 из 16

Тема: Original Vandy Vape Mato RDTA with BF Pin available Now!

  1. #1
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8

    Original Vandy Vape Mato RDTA with BF Pin available Now!

    Hi, guys! Welcome to New Product Introduction! I have a question: do you need a RDTA at present? Today let me introduce you one RDTA named Original Vandy Vape Mato RDTA with BF Pin. Now let’s take a closer look at the RDTA below.

    The Vandy Vape MaTo RDTA combines the best of RDA and RTA and cuts an extremely good figure. As usual with a top coiler, the coiling deck is mounted above the tank, which is of great benefit to the taste. The MaTo is also able to boast dense, compact steam even with moderate battery power from 45 watts.
    A real highlight is the airflow system. The tank is designed for DL (Direct Lung), but at the same time the draw resistance is clearly noticeable even with the airflow completely open. Before reaching the coil, the air is guided through 13 small holes on each side and swirled. This technology further intensifies the taste.



    Main Features:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Have you worried about that you not know enough about the product?
    Don't worry,this time we present to you the introduction video.



    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

  2. #2
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    Последний раз редактировалось Tina3FVAPE; 02.03.2020 в 06:33.

  3. #3
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    Последний раз редактировалось Tina3FVAPE; 03.03.2020 в 07:04.

  4. #4
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    Последний раз редактировалось Tina3FVAPE; 05.03.2020 в 06:44.

  5. #5
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

  6. #6
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
    Последний раз редактировалось Tina3FVAPE; 09.03.2020 в 09:52.

  7. #7
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
    Последний раз редактировалось Tina3FVAPE; 16.03.2020 в 10:52.

  8. #8
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:


    Description:
    A real highlight is the airflow system. The tank is designed for DL (Direct Lung), but at the same time the draw resistance is clearly noticeable even with the airflow completely open. Before reaching the coil, the air is guided through 13 small holes on each side and swirled. This technology further intensifies the taste.

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

    Vaping accessories maybe you need:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    Mechanical Mod you would like:
    3FVAPE - Mechanical Mod >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
    Последний раз редактировалось Tina3FVAPE; 19.03.2020 в 09:38.

  9. #9
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:


    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>

    Vaping accessories maybe you need:
    3FVAPE - Misc >>>
    3FVAPE - Coil >>>

    More Original Vandy Vape products are in stock now:
    3FVAPE - Original Vandy Vape >>>

    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
    Последний раз редактировалось Tina3FVAPE; 23.03.2020 в 09:58.

  10. #10
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in pre-order now on 3FVAPE.

    Let's check the Scene Photo:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    Bottom Feeder vaping equipments:
    3FVAPE - Squonk >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
    Последний раз редактировалось Tina3FVAPE; 26.03.2020 в 06:53.

  11. #11
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:


    Description:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Mechanical Mod you would like:
    3FVAPE - Mechanical Mod >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.

    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.

    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
    Последний раз редактировалось Tina3FVAPE; 31.03.2020 в 11:59.

  12. #12
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:


    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Wick & Coil:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>

    More Original Vandy Vape products are available:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
    Последний раз редактировалось Tina3FVAPE; 07.04.2020 в 07:26.

  13. #13
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in pre-order now on 3FVAPE.

    Let's check the Scene Photo:


    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Bottom Feeder equipments:
    3FVAPE - Squonk >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>

  14. #14
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:


    Description:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>
    ------------
    Dear customer,

    Due to the Coronavirus affected, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
    Последний раз редактировалось Tina3FVAPE; 03.04.2020 в 11:16.

  15. #15
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    Have you ever worried about that you not know enough about the product?
    Don't worry,this time we present to you the Original Vandy Vape Mato RDTA with BF Pin unboxing video.



    Is this video done some help to you?
    Check the product page at 3FVAPE to find more:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
    Последний раз редактировалось Tina3FVAPE; 07.04.2020 в 07:28.

  16. #16
    Гуру Аватар для Tina3FVAPE
    Репутация: 69
    Регистрация: 07.07.2015
    Пол:
    Адрес: Shenzhen
    Сообщений: 11,287
    Записей в дневнике
    8
    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:


    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    We can ship these items in 24hrs after payment confirmed on business day.

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Wick & Coil:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>
    ------------
    Dear customer,

    Due to the Coronavirus affected, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>

Похожие темы

  1. Lauched! Original Vandy Vape Pyro V3 RDTA with BF Pin
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 5
    Последнее сообщение: 21.11.2019, 10:19
  2. New arrival! Original Cthulhu Mulan MTL RDTA with BF Pin
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 4
    Последнее сообщение: 07.10.2019, 09:42
  3. [New Available]Original Hcigar Maze V4 RDA with BF Pin
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 0
    Последнее сообщение: 26.08.2017, 12:30
  4. SXK Hussar RDTA with BF Pin Clone
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 0
    Последнее сообщение: 29.06.2017, 11:14
  5. [Sale] Original Vandy Vape ICON RDA With BF Pin Over 23% Off
    от Tina3FVAPE в разделе 3fvape.com
    Ответов: 3
    Последнее сообщение: 12.04.2017, 15:13

Метки этой темы

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  

Условия предоставления информации | Отказ от ответственности

© eCigTalk.ru 2010-2019